Alumni
Education
Hanyang University
February 1999 ~ February 2005
Ph.D., Department of Automotive Engineering
Dissertation, "Closed-loop Control of SOC for Common-rail Direct Injection Diesel Engines", (Advisor: M. Sunwoo)
Hanyang University
February 1997 ~ February 1999
M.S., Department of Automotive Engineering
Thesis, " A Study on the Development of an Electronic Control System for Motorcycle Engines", (Advisor: M. Sunwoo)
Hanyang University
March 1993 ~ February 1997
B.S., Department of Mechanical Engineering
Career & Award
Automotive Control & Electronics Laboratory
March 2005 ~
Assistant Research Professor
Research interests
Engine Modeling and Control
Injector Driver (Solenoid & Piezo)
Engine Management System
Personal interests
Motor Sports(Car & Motorcycle Racing, Kart, Self-made Car Racing)
Off-road and On-road Touring with Enduro Motorbike
Hobby Electronics
Publications
International Journals
Closed-loop Control of Start of Combustion using Difference Pressure Management
Proc. Institution of Mechanical Engineers, Part D: J. of Automobile Engineering, Vol.220, pp.1615-1628, November 2006
A study on the injection characteristics of a liquid-phase liquefied petroleum gas injector for air-fuel ratio control
Proc. Institution of Mechanical Engineers, Part D: J. of Automobile Engineering, Vol.219, pp. 1037-1046, August 2005
Experimental analysis of a liquid-phase liquefied petroleum gas injector for a heavy-duty engine
Proc. Institution of Mechanical Engineers, Part D: J. of Automobile Engineering, Vol.218, pp.719-727, July 2004
International Conferences
Cylinder Pressure Based Combustion Phasing Control of a CRDI Diesel Engine
SAE Paper 2007-01-0772, April 2007
SOC Control for Common-rail Diesel Engines using Cylinder Pressure Information
FISITA World Automotive Congress, October 22-27, 2006, Yokohama, Japan
Detection and control of SOC for CRDI diesel engines
18th Internal Combustion Engine Symposium (International), December 20-22, 2005, Jeju, Korea
Development of a Programmable Driver for Solenoid-type 2-way-valve Common-rail Injectors
13th International Pacific Conference on Automotive Engineering, Aug 22-24, 2005, Gyeongju, Korea
Controller Platform for a Fuel-cell Power Plant for Vehicles
The 19th International Battery, Hybrid and Fuel Cell Electric Vehicle Symposium & Exhibition (EVS-19), Busan, Korea, October 19-23, 2002
Design and Development of an ECU and its Air-Fuel ratio control scheme for an LPG engine with a bypass injector
Proceedings of the IEEE International Vehicle Electronics Conference IVEC'99, pp.457-469, September 6-9, 1999
Domestic Journals
전자제어식 직접분사 디젤엔진의 연료제어를 위한 인젝터 관측기 설계
Journal of Control, Automation, and System Engineering, Vol.10, No.12, pp.1305-1311, December 2004
앞먹임 신경회로망을 이용한 HSDI Common-Rail 인젝터의 파라미터 추정 및 모델링
대한기계학회논문집, B권, 제28권, 제8호, pp.984-988, 2004
연료전지 하이브리드 전기자동차의 동력원 최적화 용량 설계
한양대학교 기계기술연구소논문집, Vol.9, No.1, pp.21-28, 2003
CNG EMS 설계 관련 핵심 기반 기술
제8회 차세대자동차기술논문집, pp.175-180, September 200
CNG EMS 설계 관련 핵심 기술
제7회 차세대자동차기술논문집, pp.200-205, September 7-8, 1999
CNG EMS 설계 관련 핵심 기반 기술
제6회 차세대자동차기술논문집, pp.170-175, September 9-10, 1998
Domestic Conferences
기체연료 엔진에서 공연비제어를 위한 흡입공기량 추정
한국자동차공학회논문집, Vol.9, No.5, pp.131-139, September 2001
연료전지 하이브리드 자동차의 다중 동력 시스템에 대한 용량 최적화에 관한 연구
한국자동차공학회 추계학술대회논문집, Vol.1, pp.485-492, November 21, 2003
연료분사량 제어를 위한 천연가스엔진의 공기량 및 공연비 예측
한국자동차공학회 춘계학술대회논문집, Vol.1, No.1, June 22, 2001
LPG 액체분사엔진의 연료 분사 제어에 관한 연구
한국자동차공학회 추계학술대회논문집, Vol.1, pp.190-195, November 23, 2001
FBM-LPG엔진 제어에 관한 실험적 연구
한국자동차공학회 추계학술대회논문집, pp.114-119, November 27-28, 1998